Today a weather record for the warmest day in October for London and the south east was broken. Taking advantage of the situation I applied the last layer of epoxy to the rudder and stock before attempting to join them tomorrow or the next day with a bolt and nut so that they can articulate.
I’ll probably set some copper tubing in both the stock and rudder to act as channels for the bolt so that the rudder and stock can articulate freely. I’ll make a small hole in the aft edge of the rudder, about half way between the top and bottom for attaching a line that will run between the groove on the upper semi-circular curve of the rudder to a cleat on the tiller for lifting or lowering the rudder. Eventually the rudder and stock will be painted in the same colour as the hull.
No comments:
Post a Comment