In deference to my wife, I removed the mast from the hall that links our front door with the kitchen. For the last week it has resided in a recumbent position on chocks of wood with plastic bin bags between it and the carpet.
Today I applied the final coat of epoxy over the fibreglass that encapsulates the upper 300 millimetres of the mast. This was necessary to protect areas that had been opened to the elements during the finishing process when I smoothed them with a file, but instead of taking the mast into the house I built a tarp frame around it in the garage to keep it warm by the use of an electric fan heater. All being well, the epoxy should harden fairly quickly in this temporary greenhouse.
Most of the afternoon was taken up with time set aside for buying the metal parts required for my Paradox micro-sailboat. I bought the rudder bolt, the tiller bolts, the lower gudgeon bolts, the mast sheave, the bolts for retaining the hatch slider and the lag bolt for the yuloh. The latter will have to be modified by welding and grinding. I also bought the panel headed screws for attaching the Perspex windows, the brass piano hinges with screws to match for fixing the tops of the under-floor storage lockers and the small gauge copper pipes for both of the water tanks’ breathing tubes.
No comments:
Post a Comment