I have been thinking of a solution for instantly attaching
the arm of the Autohelm to the steering line, and today it suddenly dawned on
me how it could be done. I found the bits I required in my bosun’s box: a small
length of MDPE yellow gas pipe; an old cleat, two bolts and nuts; a jubilee
clip; a tiny piece of stainless rod for a fixing pin, and a small length of
cord.
The fixing pin ensures there is no forward and backward
movement of the gas pipe, and it is kept in place with the jubilee clip which
also clamps the pipe to the end of the Autohelm’s arm.
The photos show how the device was made.
Attaching it to the line is almost instantaneous. A cord is
permanently tied to the cleat and it is left hanging over the steering
line. To engage the Autohelm, simply wind the cord around the steering line and
cleat home. To ensure the steering line does not part from the cleat, make another
turn around it and cleat home.
An advantage of this system over the double cord linkage is
the immediacy of fixing and unfixing the rod to the steering line. Only one
attachment has to be made, and because the attachment is rigid, there is no play.
I think this arrangement is superior to the one I had on ‘Faith’,
but I’ll have to see what happens in practice.
Having outstanding problems like that to solve used to worry me, to the point that it kept me awake at night. I used to keep a pad and pen on my bedside cabinet to write something down or a quick sketch . . . . at 4 in the morning! It no longer worries me, because I know I will always find a way to do it. Normally, then in comes a floods of different ideas and it's a case of which is the best!
ReplyDeleteWell done Bill.
Steve
Steve,
ReplyDeleteI believe the creative process carries on in the subconscious, and unexpectedly there may come a ‘eureka’ moment when a solution is revealed.
Cheers,
Bill.